PARAMETER SETTING DISPLAY
EXTERNAL
BATTERY
CABINETS
1c - 9c
Select the number of
external battery cabinets
connected to the UPS
INDICATION
This parameter cannot be
set on the UPS 3 101 78
END SCREEN
Press to save all
changes
4.7 Emergency Power Off (EPO)
The UPS has an external normally closed contact that can be opened to activate the immediate
stop of the UPS.
The EPO terminal is at the back of the UPS and it is needed for the functioning of the UPS.
4.8 Communication devices
The UPS has one RS232 serial port, one USB port (not available on 3 101 78) and one SNMP slot.
To Next Page
Loading...
