Need help?Do you have a question about the LEGRAND inform DSP EVO 6 KVA and is the answer not in the manual?
General| Apparent Power | 6 kVA |
|---|---|
| Active Power | 5.4 kW |
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Technology | On-line double conversion |
| Form Factor | Tower |
| Frequency Range | 50/60 Hz |
| Communication Interface | USB, RS232, SNMP (optional) |
| Operating Temperature | 0-40 °C |
| Battery Type | Sealed Lead Acid |
Important safety instructions and considerations for operating the UPS, including warnings about voltage and temperature.
Explanation of safety symbols used in the manual, indicating attention, static discharge sensitivity, and electric shock hazards.
Details and explanations for various symbols used within the manual, covering direct/alternating current, ground, and disposal.
Description and diagrams of the UPS front and rear panel views, detailing various ports and components.
Explanation of the UPS working principle with a diagram, detailing components like rectifier, inverter, and battery.
Details on the product categories for UPS, specifying models like 6KVA and 10KVA with their remarks.
Steps for unpacking the UPS, checking for damage or missing parts, and verifying the purchased model.
Important notes on UPS placement, ventilation, avoiding environmental hazards, and connecting power.
Guidance on connecting input and output cables, wire gauge requirements, and terminal connections with safety warnings.
Instructions for connecting RS-232 cables and installing optional SNMP cards for communication.
Procedure for connecting external battery packs, including quantity requirements, voltage checks, and connection polarity.
Instructions for starting up and turning off the UPS in different modes (Line, Battery) and associated LED/LCD indications.
Detailed overview of the UPS operating panel, including LED indicators and buttons like OFF, ON, and Scroll.
Details of the various interfaces and content displayed on the UPS LCD screen, including voltage, current, load, and status.
Guide on how to navigate and set various parameters using the UPS control buttons, including mode, voltage, and frequency settings.
Listing of UPS event and alarm messages, organized alphabetically, to assist in troubleshooting.
Comprehensive list of UPS alarm warnings, associated buzz patterns, and LED indications for fault diagnosis.
Guidelines for maintaining UPS batteries, including charging cycles, replacement, and safety precautions during maintenance.
Table listing common UPS faults, their causes, and solutions for troubleshooting, along with instructions for contacting service.
Information on EMC and safety standards that the product complies with, including specific standard numbers like IEC62040.
Detailed specifications for AC input, including capacity, power factor, voltage, frequency, and bypass ranges.
Defines the pinout of the USB male port, including VCC, D-, D+, and GND for connection.
Details the pinout of the RS232 male port, including TXD, RXD, GND, and NC pins for communication.
To Next Page