1
QMotion
®
QzHub/Qz App
User’s Guide
No: IS-0000 – rev. A
The QzHub hardware device allows you to easily control your QMotion Zigbee-
enabled, motorized shades from your phone in conjunction with the Qz App. The
Qz App’s intuitive interface and simple navigation allows you to easily edit, add,
commission, and control local shades.
OVERVIEW
FEATURES AND OPERATION OVERVIEW
• The QzHub can handle up to 32 nodes (base) to 105 nodes (for full network size, if using Range Extenders). Nodes include
shades, remotes and extenders.
• ZigBee 3.0 ready and scalable for future updates
• USB expandability with two on-board USB expansion ports
• Onboard battery backup utilizing four AA batteries allows for operations, control and communication during power interruptions
• Receives updates for rmware, API additions, new devices drivers, technology driver, and feature updates
Description Specication
Dimensions, HWL 1.55”H x 4.5” W x 5.87”L
Weight 0.85lbs (w/ batteries), 0.65lbs (w/o batteries)
Ambient Operating Temperature 0-40°C
Storage Temperature -20 to 60°C
Ambient Operating Humidity 0-95% non-condensing
Storage Humidity 0-99% non-condensing
Indicators Visual: 3x LEDs, Audible: Piezoelectric sounder (up to 80dB@10cm)
Processor, ARM Cortex A8 TI Sitara AM3352 (1GHz)
System Memory 512MB 800MHz
Application Storage eMMC NAND Flash: 2 GB
LAN/WAN Interface Description
Ethernet 10/100 w/ Auto MDIX, IEEE 802.3-compliant, auto-negotiation and automatic polarity
detection
FCC Compliance Complies with FCC Part 15 Class C
ZigBee Silicon Labs EM3587 2.4 GHz (+18dBm)
USB Texas Instruments AM 335BZCZ100 (2x Type-A host ports)
Wireless Description Specication
ZigBee Range: 100+ ft. (30+ m) L.O.S., TX Strength: +18 dBm
Software Description Specication
iOS iOS 9+
Android Kitkat 4.4+
SPECIFICATIONS
To Next Page
Need help?
General
