LEGRAND QMotion User Manual

1
QMotion
®
QzHub/Qz App
User’s Guide
No: IS-0000 – rev. A
The QzHub hardware device allows you to easily control your QMotion Zigbee-
enabled, motorized shades from your phone in conjunction with the Qz App. The
Qz App’s intuitive interface and simple navigation allows you to easily edit, add,
commission, and control local shades.
OVERVIEW
FEATURES AND OPERATION OVERVIEW
• The QzHub can handle up to 32 nodes (base) to 105 nodes (for full network size, if using Range Extenders). Nodes include
shades, remotes and extenders.
• ZigBee 3.0 ready and scalable for future updates
• USB expandability with two on-board USB expansion ports
• Onboard battery backup utilizing four AA batteries allows for operations, control and communication during power interruptions
• Receives updates for rmware, API additions, new devices drivers, technology driver, and feature updates
Description Specication
Dimensions, HWL 1.55”H x 4.5” W x 5.87”L
Weight 0.85lbs (w/ batteries), 0.65lbs (w/o batteries)
Ambient Operating Temperature 0-40°C
Storage Temperature -20 to 60°C
Ambient Operating Humidity 0-95% non-condensing
Storage Humidity 0-99% non-condensing
Indicators Visual: 3x LEDs, Audible: Piezoelectric sounder (up to 80dB@10cm)
Processor, ARM Cortex A8 TI Sitara AM3352 (1GHz)
System Memory 512MB 800MHz
Application Storage eMMC NAND Flash: 2 GB
LAN/WAN Interface Description
Ethernet 10/100 w/ Auto MDIX, IEEE 802.3-compliant, auto-negotiation and automatic polarity
detection
FCC Compliance Complies with FCC Part 15 Class C
ZigBee Silicon Labs EM3587 2.4 GHz (+18dBm)
USB Texas Instruments AM 335BZCZ100 (2x Type-A host ports)
Wireless Description Specication
ZigBee Range: 100+ ft. (30+ m) L.O.S., TX Strength: +18 dBm
Software Description Specication
iOS iOS 9+
Android Kitkat 4.4+
SPECIFICATIONS

LEGRAND QMotion Specifications

General

Type	Remote Control
Brand	LEGRAND
Model	QMotion
Category	Remote Control
Power Source	Battery
Compatibility	QMotion shades

Summary

Installer Instructions: Adding a New Hub

Add New Hub

Navigate to the Add Devices page and select the hub you want to add.

Discovered Hubs

Hubs connected to the same network as the app device will be displayed.

Activate Hub

Tap the hub and follow on-screen prompts to activate it.

Adding Shades to the Network

Select Hub for Shades

Navigate to Add Devices and select the hub to access the Add Shades page.

Shade Device Added

Tap Join, then manually tug shades into their joining state.

Shade Configuration Options

Tap shade icon for Rename, Set Limits, Identify, or Delete options.

Setting Shade Limits

Nudge Shade Down

Nudges the shade down by the selected amount.

Nudge Shade Up

Nudges the shade up by the selected amount.

Adjust Nudge Distance

Select Nudge Distance and use arrows to adjust shade position.

Confirm Limit Setting

Manually position shade and tap Set Limit to confirm.

Editing Individual Devices

Navigate to Edit Devices

Open navigation menu and select Edit Devices to configure.

View Device Details and Actions

Displays device info, battery, network data, and actions.

Set Upper/Lower Shade Limits

Delete Device from Hub

Confirm Device Deletion

Delete Device from List View

Group Control Page

Control Shades by Group

Access Individual Shade Control

Shade Control Page

Adjust Individual Shades

Fine-tune Shade Position

Access Shade Configuration

Tug Commands

Enter and Utilize Tug Command Mode

Learn how to enter command mode and select options via shade tugs.

Specific Tug Command Functions

Details on Join Network, Set Lower Limit, Network Reset, and Factory Reset.

Pairing Remote to Roller Shade

Clear Existing Remote Pairing

Pair Remote to QzHub

Associate Shade with Remote Channel

Register Shade to Channel