Lehigh DX3 - MRAM - Load; Backup - Flash; Flash - Save; Flash - Load

Save to Flash
Press # to save
Load from Flash
Press # to load
Load from MRAM
Press # to load
7.7.3 MRAM - Load
This dialog lets you load the configuration from MRAM.
Press # to load the configuration from MRAM. The DX3 rack
will restart with the MRAM configuration.
The DX3 rack will restart with the new configuration.
7.7.4 Backup – Flash
This menu has dialog selections to save and load rack
configuration data to/from flash memory. Flash memory is
on the SCM module. This backup is an additional backup
location rather than MRAM.
7.7.5 Flash - Save
This dialog lets the user save the current configuration in
RAM to FLASH.
Press # to save the configuration.
To exit this dialog, do an escape using the “enter/esc” button.
7.7.6 Flash – Load
This dialog lets you load the configuration from flash
memory.
Press # to load the configuration from flash. The DX3 rack
will restart with the flash configuration.
The DX3 rack will restart with the new configuration.
DX3 Manual 28
Flash
►Save...
Load...