NOTICE
Dropping, misusing, modifying, storing the product for long periods or
transporting the product
Watch out for erroneous measurement results.
Precautions:
▶
Periodically carry out test measurements, particularly after the product
has been subjected to abnormal use and before and after important
measurements.
NOTICE
Remote control of product
With the remote control of products, it is possible that extraneous targets will
be picked out and measured.
Precautions:
▶
When measuring in remote control mode, always check your results for
plausibility.
NOTICE
Improper shutdown of the system
This could lead to a loss of essential system information.
Precautions:
▶
Always ensure proper shutdown of the system. Do not force shutdown of
the system.
CAUTION
Before any cleaning procedure, ensure that the instrument is switched off.
CAUTION
Unused connectors must be protected using the attached dust cap.
CAUTION
Improperly secured accessories
If the accessories used with the product are not properly secured and the
product is subjected to mechanical shock, for example blows or falling, the
product may be damaged or people can sustain injury.
Precautions:
▶
When setting up the product, make sure that the accessories are correctly
adapted, tted, secured, and locked in position.
▶
Avoid subjecting the product to mechanical stress.
8 Safety Directions
To Next Page
Loading...
Need help?
General
