Leica BLK ARC User Manual

Suitable for use in dry environments only and not under adverse conditions.
1.4 Responsibilities
Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as
Leica Geosystems, is responsible for supplying the product, including the user
manual and original accessories, in a safe condition.
The person responsible for the product has the following duties:
•
To understand the safety instructions on the product and the instructions
in the User Manual
•
To ensure that it is used in accordance with the instructions
•
To be familiar with local regulations relating to safety and accident pre-
vention
•
To stop operating the system and inform Leica Geosystems immediately if
the product and the application become unsafe
•
To ensure that the national laws, regulations and conditions for the oper-
ation of the product are respected
WARNING
Unqualied installation on automatic machines and robots
This may result in personal and material damage.
Precautions:
▶
This product may be installed on automatic machines and robots only by
an appropriately trained and qualied specialist.
1.5 Hazards of Use
WARNING
Distraction or loss of attention
During dynamic applications there is a danger of accidents occurring if the
user does not pay attention to the environmental conditions around, for
example obstacles, excavations or trafc.
Precautions:
▶
The person responsible for the product must make all users fully aware of
the existing dangers.
WARNING
Inadequate securing of the working site
This can lead to dangerous situations, for example in trafc, on building sites
and at industrial installations.
Precautions:
▶
Always ensure that the work site is adequately secured.
▶
Adhere to the regulations governing safety, accident prevention and road
trafc.
Environment
Manufacturer of the
product
Person responsible
for the product
Safety Directions 7

Leica BLK ARC Specifications

General

Brand	Leica
Model	BLK ARC
Category	Laser Level
Language	English