Leica DISTO E7300 - Measuring Functions; Measuring Single Distance; Permanent;Min-Max Measuring; Add; Subtract

Leica DISTO
TM
E7300 788218a
5
ENMeasuring Functions
Measuring single distance
1
Aim active laser at target.
2
8.532 m
3
i
Target surfaces: Measuring errors
can occur when measuring to
colourless liquids, glass, styrofoam
or semi-permaeble surfaces or
when aiming at high gloss surfaces.
Against dark surfaces the
measuring time increases.
Permament / Minimum-Maximum measuring
1
2 sec
8.532 m
Used to measure room diagonals (maximum val-
ues) or horizontal distance (minimum values).
The minimum and maximum dis-
tance measured is displayed (min,
max.). The last value measured is
displayed in the main line.
min. max.
2
Stops permanent / minimum-
maximum measuring.
3
Add / Subtract
7.332 m
1
The next mea-
surement is added
to the previous
one.
2
The next mea-
surement is sub-
tracted from the
previous one.
7.332 m
12.847 m
3
i
The result is shown in the main line
and the measured value above.
This process can be repeated as re-
quired. The same process can be
used for adding or subtracting ar-
eas or volumes.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com