Leica DMI6000B - Combination Methods

91
8. Operation
8.4 Combination Methods
(Leica DMI4000 and DMI6000 B)
Up to two combination methods are possible de-
pending on the features of the individual micro-
scope:
FLUO/PH and FLUO/DIC
• Select the combination method
by pressing the variable button COMBI .
Alternatively: press the variable button
CHANGE COMBI .
(For details on button assignments, please see
the identification sheet.)
The content of the display changes accord-
ingly.
• Place a specimen on the stage and select a
suitable objective.
• Select the desired filter cube using the fixed
function buttons on the front panel.
• The illumination settings for the fluorescence
and transmitted-light axes can be adjusted
separately.
•Toggle the illumination axes with the TL/IL
function button. The content of the
LeicaScreen changes accordingly.
FLUO > DIC
The transmitted illumination is activated.
FLUO < DIC
The fluorescence illumination is activated.
Note:
The
manual analyzer (Fig. 110) must be used for
the FLUO/DIC method as described in Chapter
8.2.5, p. 87.