Leica M320 - Remote Control Pairing

59
1
Press to start or end the
pairing.
Press and hold the button on
the remote control, to dene
the pairing button, until the
conrmation message is
displayed on the screen.
All of the buttons (01–12)
except the
button can be
used for this.
Upon completion, a ‘beep’
sound will be generated and
the camera will only respond
to this particular remote
control after pairing.
8.3.6 PAIRING REMOTE CONTROL
2
01
03
05 06
02
04
09
1008
11 12
07
3
Leica M320 / Ref. 10 718 878 / Version 02
INFO
Remote control pairing allows
the camera to only respond
to the one specic remote
control, which had been
paired to the camera
previously.
This is helpful when there are
multiple cameras and remote
controls in the same room.
INFO
In order to achieve successful
pairing and avoid pairing by
mistake, the second step
must be performed within
4seconds.
If a “timeout” is displayed
after 4seconds, press the
“Pair” button again to start
the process.
Resetting to factory setting:
Press the
button to start
the process.
Press the
button until a
corresponding conrmation
is displayed on the display.
8 COMPONENTS AND ACCESSORIES