Need help?Do you have a question about the Leica TCS SP8 STED 3X and is the answer not in the manual?
General| Super-resolution | Yes |
|---|---|
| Software | Leica Application Suite X (LAS X) |
| Type | Confocal Microscope |
| Technology | STED (Stimulated Emission Depletion) |
| Fluorophores | Various, compatible with STED |
| Laser Lines | 405 nm, 488 nm, 552 nm, 640 nm |
| Detectors | Hybrid detectors (HyD), PMT detectors |
| Objectives | Various objectives available, including oil immersion, water immersion, and dry objectives with different magnifications and numerical apertures (NA) |
| Scanning | Galvo scanner, resonant scanner |
| Dimensions (W x D x H) | Varies depending on configuration; typically a large system requiring significant bench space |
Key responsibilities and requirements for system operators and users.
Guidelines for safe system setup, handling, and initial operation.
Precautions for safe electrical connection and operation to prevent shocks.
Information on system safety devices and the importance of labels.
Essential safety measures and precautions for laser operation.
Warnings and precautions regarding exposure to liquids and humidity.
Restrictions and guidelines regarding system modifications or component placement.
Actions to take in case of specific system malfunctions for safety.
Guidelines for selecting a suitable location for the system.
Best practices and warnings for using the system software.
Measures to protect the system from damage and ensure longevity.
Details on different system configurations available.
Identification and function of controls on the supply unit.
Key technical specifications including dimensions and electrical data.
Information regarding the system's electromagnetic compatibility.
Location of the system's serial number label.
General requirements for the operating environment.
Guidelines for minimizing vibrations for optimal performance.
Recommended room size and space around the system.
Detailed requirements for electrical connections and power supply.
Information on the load capacity of the supply unit's power outlet.
Considerations for waste heat management and system cooling.
Classification of lasers used in the system and associated safety.
Overview of visible and infrared lasers compatible with the system.
Function and connection of the laser safety chamber.
Purpose and location of the main circuit breaker for power disconnection.
Operation of key switches for system and laser access control.
Function of indicators signaling laser operational readiness.
Details on interlock connectors for system safety.
How safety switches on the microscope interrupt laser paths.
Interpretation of system warning messages and required actions.
Description of laser protection tubes and shields.
Safety labels found on the laser safety chamber.
Safety labels on inverted and upright microscopes.
Safety labels located on the scan head.
Safety labels found on the STED module.
Safety labels on compact and flexible supply units.
Safety labels on the beam coupling unit.
Safety labels on the cover for the replacement flange.
Safety labels on HyD RLD and white light laser.
Step-by-step guide for switching the system on and off.
Step-by-step guide for switching the system on and off.
Instructions for operating HyD reflected light detectors.
Procedure for launching and configuring the LAS X software.
Overview of the LAS X software's graphical interface elements.
How to activate and deactivate the STED laser within LAS X.
Accessing and utilizing the LAS X software's online help resources.
Steps for changing specimens on an upright microscope.
Steps for changing specimens on an inverted microscope.
Steps for changing filter cubes while using the plate holder.
Guidelines for cleaning system surfaces to avoid damage.
Recommendations for cleaning optical components safely.
General advice for maintaining the system's condition.
Procedure and requirements for coolant replacement.
Maintenance for cooling systems of external lasers and peripherals.
Steps for refilling the external coolant tank.
List of US patents protecting the system.
Reference to safety data sheets for third-party manufacturers.
System compliance with relevant international standards.
Administrative measures for electronic information products in China.
To Next Page