22
22
RTJ400 User Guide
The Leigh eBush
Chapter 6
6-6 Adjust the eBush with the pin wrench. Markings on
the eBush indicate which way to turn it for a looser or tighter
fit.
Remember, every time you adjust the eBush you must
re-tighten the eBush nut.
6-8
As shown in the examples above, each chapter provides a
place to mark your perfect eBush setting, for easy repeatability
the next time.
■
6-7
One division of the eBush changes the joint glue line by
0.002" [0.05mm]. A perfect fit will be established with one or
two test cuts.
3/8" Box Joint
Through
Dovetails
80-500 bit
Half-Blind
Dovetails
128-500 bit
6-5 All settings for the eBush will be aligned to the line
A
you’ve drawn on the router table. The line will also help guide
the RTJ400.
A
To Next Page
Loading...
