2
Table of contents
1 Important safety instructions 4
1.1 Intended use 5
1.2 Non-intended use 5
2 Technical data 6
3 Transport 7
4 Your WELDPLAST 600/605 8
4.1 Type plate and identification 8
4.2 Scope of delivery (standard equipment in the case) 8
4.3 Overview of device parts 9
5 Settings on the WELDPLAST 600/605 11
5.1 Adjusting the handle 11
6 Commissioning and operation/operation 12
6.1 Work environment and safety 12
6.2 Prepare device 13
6.3 Starting the device 13
6.4 Welding sequence 14
6.5 Finishing welding 15
6.6 Switching o the device/Maintenance 15
7 Quick Reference Guide WELDPLAST 600/605 16
7.1 Switching on/Starting 16
7.2 Switching o 16
8 The control panel of the WELDPLAST 600/605 17
8.1 Function buttons 17
8.2 Display 18
8.3 Setting the welding parameters 18
8.4 Display symbols of the status display (Display 40) 19
8.5 Display symbols of the work display (Display 35) 20
9 Settings and functions of the WELDPLAST 600/605 software 21
9.1 Overview menu navigation basic settings 21
9.2 Overview menu navigation Advanced Mode 23
9.3 Recipes 25
9.4 Displaying nominal values (Set values) 26
9.5 Eco mode 27
9.6 LQS Data Recording settings 28
9.7 WLAN settings 31
9.8 Machine settings 31
9.9 Info mode 35
9.10 Duty info 35
9.11 General Info 35
9.12 Warnings and error messages 36
Table of contents
To Next Page
Loading...
