EasyManua.ls Logo

Leitner LH280 User Manual

Leitner LH280
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LH280 Manual
TM

Other manuals for Leitner LH280

Question and Answer IconNeed help?

Do you have a question about the Leitner LH280 and is the answer not in the manual?

Leitner LH280 Specifications

General IconGeneral
BrandLeitner
ModelLH280
CategoryHeadsets
LanguageEnglish

Summary

Setup

Connecting to a telephone with a headset port

Connect the headset base to a phone with a dedicated headset port.

Connecting to a telephone without a headset port

Connect the headset base to a phone by unplugging the handset cord.

Connecting with a Leitner Handset Lifter

Connect the handset lifter to the AUX port for automatic answering.

Connecting a Leitner Electronic Hookswitch (EHS) cable

Connect EHS cable to phone and headset base for remote call control.

Connecting to your computer USB port

Connect the headset base to a computer via USB for PC calls.

Replacing the eartip

Instructions for twisting and pulling the eartip to replace it.

Operation

Making an outgoing call in telephone mode

Steps to initiate an outgoing call using the telephone line.

Receiving an incoming call in telephone mode

How to answer incoming calls when connected to a telephone line.

Making an outgoing call in USB/PC mode

Steps to initiate an outgoing call using the computer/USB connection.

Making a call using UniBase® Mode

How to conference phone and PC calls together using UniBase technology.

Adjusting the ring volume

How to control the incoming call ring volume via headset buttons.

Muting the headset microphone

Instructions for muting and unmuting the headset microphone during a call.

Headset microphone volume setting

Adjusting the user's speaking volume using buttons on the headset base.

Adjusting headset listening volume

How to control the volume of audio heard through the headset.

Out of range and reconnection

Explanation of signals and behavior when the headset is out of base range.

Battery level indication

How to interpret the LED indicators on the base for battery status.

Training mode and making a conference call

How to connect a second headset for training or conference call purposes.

Overview of audio signals

A table detailing sounds and their corresponding meanings (e.g., low battery).

Registering a new headset to the base

Procedure to pair a new headset with the LH280 base unit.

Controlling the Automatic Answer feature for calls

How to enable/disable the automatic answering of calls when lifting the headset.

Permanently register an additional headset

Steps to permanently pair a second headset with the base.

Troubleshooting

Headset not working troubleshooting

Addresses issues with the headset not functioning after connection.

Poor call audio troubleshooting

Solutions for poor audio quality or inability to hear calls.

Handset lifter no audio troubleshooting

Troubleshooting connection issues when using a handset lifter.

Health and safety instructions

General operating conditions

Specifies temperature ranges for operation, charging, and storage.

Product safety warnings

Precautions regarding small parts, accessible outlets, and charger usage.

Product handling and liquid avoidance

Advice against disassembly, inserting objects, and contact with liquids.

Overheating and skin irritation warnings

Instructions for discontinuing use if the product overheats or causes skin irritation.

Hearing protection guidelines

Recommendations for safe listening volumes and protecting hearing from damage.

Charging and battery safety

Safety guidelines for charging, battery handling, and disposal/recycling.

Related product manuals