5.1004.8641.0 B
3-4 Description and Operation
Calibrate the FPS when the alarm No feed detected is generated.
If the feed type is too soft, it can happen that the FPS does not detect the feed reliably.
Ignore the alarm or switch off the FPS and frequently examine if the feed hopper works
properly.
Feed Hopper Calibration
It is advised to calibrate the feed hopper frequently to examine the feed hopper on
demixing and segregation of feed.
To calibrate the feed hopper, See Calibrate the Feed Portion on page 5-6.
in n o vato rs in agriculture
To Next Page
Loading...