LELY ASTRONAUT A4 - Page 43

5.1004.8641.0 B
Description and Operation 3-5
Examine the Feed Type Suitability
Provide an Indication if the Feed is Suitable for the Hopper
9-9600-2821-0
Figure 8. Fill a cup
9-9600-2822-0
Figure 9. Press the feed down
9-9600-2823-0
Figure 10. Wipe off the excess of feed
9-9600-2825-0
Figure 11. Carefully tilt the cup
9-9600-2830-0
Figure 12. Wipe the surface clean, reposition of feed
particles
9-9600-2929-0
Figure 13. Wipe the surface clean
1. Fill a cup with feed (see figure 8 on page 3-5).
2. Press the feed down with medium force (see figure 9 on page 3-5).
If the feed level is below the cups edge, fill it up and press it down again with (reasonable) force.
3. Wipe off the excess of feed above the cups edge (see figure 10 on page 3-5).
4. Place the cup on a flat surface and carefully tilt the cup on its side (see figure 11 on page 3-5).
in n o vato rs in agriculture