LELY ASTRONAUT A4 User Manual

5.1004.8641.0 B
Description and Operation 3-7
Examine the Feed Suitability
Different types of Feed
Figure 15. Different type of feeds
KEY: From left to right, the feed types become more difficult to feed.
Risk indication and Feed Suitability
The steeper the angle (α°), the more likely it will cause bridging problems in the feed hopper. The angle vs
risk analysis (see Provide an Indication if the Feed is Suitable for the Hopper on page 3-5) can be made on
this test (see table 1 on page 3-7).
Table 1. Angle vs risk indication
Angle (α°) Risk Bridging
Angle (α°) < 45°. Very low. No bridging problems are expected.
45° ≤ Angle (α°) <65°.
Low.
The chance of bridging problems in the hopper is low.
65° ≤ Angle (α°) <75°. Medium. Occasional bridging problems can be expected.
• The farmer should be aware of increased risk.
75° ≤ Angle (α°). High. Bridging problems are very likely.
• The farmer should be aware of substantial risk.
• Using a different feed type is advised.
in n o vato rs in agriculture

LELY ASTRONAUT A4 Specifications

General

Brand	LELY
Model	ASTRONAUT A4
Category	Robotics
Language	English