LELY Juno 100 - Location of the Safety Decals; Installation of Safety Decals

3.2 Location of the Safety Decals
Figure 7. Location of the safety decals
KEY:
1.Decal 'Risk for electric shock' (optional for shock device) - 2. Decal 'Do not sit on the
vehicle' and 'Keep safe distance' - 3. 'Decal 'Emergency stop button'
3.3 Installation of Safety Decals
1. Make sure the installation surface is clean and dry.
2. Make sure the temperature of the mounting surface is not less than 5
°C (41 °F).
3. Identify the correct position for the decal before you remove the
backing paper.
4. Remove a small part of the backing paper.
5. Put the decal in the correct position on the mounting surface and
carefully press the small part of exposed adhesive surface of the
decal onto the mounting surface.
6. Slowly remove the backing paper and attach the rest of the decal to
the mounting surface.
7. Puncture small air pockets in the decal with a pin and use the backing
paper to smooth the decal.
Safety Decals
3-3
F-A102.1401EN