LELY Juno 100 - Manually Drive the Juno 100; Start or Stop Timed Actions

5.4 Manually Drive the Juno 100
1. Stop all timed actions (page 5‑5).
2.
Push [ ] twice to select the menu (see figure on page 5‑5)
'Manual driving'.
3. In the menu 'Manual driving', push:
• [L] to turn right, or
• [R] to turn left, or
• [L] and [R] to go straight on.
4.
Push [ ] to change the direction, if necessary.
5. Push [START/STOP] to start, hold it.
6. Release [START/STOP] to stop.
Figure 11. Manual driving
5.5 Start or Stop Timed Actions
1. Connect the E-Link Manual Controller (page 5‑3).
2.
Push [ESC] or [ ] to wake up the E-Link.
The E-Link Manual Controller automatically goes into sleep mode when it is
not used for 10 minutes.
3.
In the main menu of the E-Link, select 'Work' and push [ ].
If the pane on the upper side of the menu, that displays the actual time, is
grayed out, the timed actions are ON.
4. Push [START/STOP].
Basic Operating Instructions
5-5
F-A102.1401EN