8
4 PREPARATION OF TRACTOR
4.1 Tyres
Ensure that all tyres- especially the rear ones - are at identical pressure.
4.2 Lift rods
Adjust lift rods to equal length. Where there are alternative positions for the lift
rods on the lower links, use the rearmost position, in order to unload the tractor
hydraulics.
4.3 Check chains or sway blocks
It is essential that the check chains or sway
blocks are adjusted so that the lower links
are free to move sideways when in working
position.
4.4 Tractor hydraulics
During work the tractor hydraulics must be
set to "floating position" or to "mixed
control".
4.5 Front weights
Fit sufficient front weights in accordance
with the recommendations of tractor
manufacturer.
4.6 Terradisc 9/400 S
The TERRADISC 9/400 S is wider than 3 m. It is not allowed to transport it on
public roads if fitted to the tractor.
4.7 Front mounted operation
When the Terradisc 9 is used for front mounted operation, the steerability is
influenced and the distance between the front edge of the combination to the
eyes of the driver is increased. The road traffic rules should be adhered to!
To Next Page
Loading...