To Next PageTo Next Page
Need help?Do you have a question about the LEMKEN Solitair 8 and is the answer not in the manual?
Provides essential safety guidelines for operating, maintaining, and handling the Solitair 8 implement safely.
Explains the purpose and importance of warning stickers fitted to the Solitair 8 for safe operation.
Details the meaning and interpretation of various warning stickers found on the Solitair 8 implement.
Specifies the required tyre pressure and identical pressure for left and right sides for safe tractor operation.
Instructions for adjusting lift rods to equal length for proper implement attachment and operation.
Ensures check chains or sway blocks are adjusted to fix lower links sideways in working position.
Specifies the requirement for a double lashing drawbar when fitting the Solitair with pole and chassis.
Addresses the importance of not exceeding allowed total weight, axle load, and tyre load of the tractor.
Lists required power sources and sockets for various electric devices on the Solitair 8.
States the requirement of a tractor PTO of 1000 1/min for the own hydraulic fan drive.
Specifies power supply requirements (12V, 25A) for electronic seed drill control and potential issues.
Details procedures for attaching and detaching the Solitair with chassis from the tractor.
Step-by-step guide for mounting the Solitair onto the soil cultivation implement using coupling parts.
Procedure for coupling the Solitair with chassis and pole to a double lashing drawbar.
Explains how to adjust the seeding depth using adjuster screws for even sowing.
Details methods for adjusting coulter pressure, including single row and central adjustments.
How to adjust coulter bar frame height for optimal working position using pins.
Explains adjusting working depth of single/suffolk coulters by changing coulter pressure.
Details the seeding shafts, seed wheels, and their switching on/off mechanism for calibration.
Provides a table with recommended settings for various seeds and sowing rates.
Instructions on opening and optionally operating slide plates for seed flow control.
Describes adjusting bottom flaps according to the seed table for proper seed flow.
Procedures for emptying the hopper, including into calibration tray and via distributor.
Guidance on regular cleaning of the dosage units, including necessary steps and precautions.
Explains the function of the tramline mechanism controlled by the electronic seed drill control.
Details the procedure for performing a calibration test for the seed drill, including adjustments.
Describes adjusting fan RPM using the flow control valve, especially when the tractor lacks this feature.
Instructions on how to fold back the cover plane or swing up the cover for filling the hopper.
Explains the disconnection of the agitator shaft for certain seeds like rape.
Describes the electronic seed level monitoring system and how it triggers an alarm.
Explains that track markers are standard equipment and how they are fitted to the chassis.
Details how to unlock, adjust, and secure track markers for optimal tractor track alignment.
Describes fitting single harrows to wheel stalks and adjusting their working depth.
Instructions for adjusting S-harrow position and pressure via pins and springs.
Overview of pre-emergence marker types and their fitting to wheel arms or coulter bar frames.
Details the mounting and adjustment of double acting hydraulic pre-emergence markers.
Describes how to pre-adjust the depth of the marking groove using springs and bolts.
Provides a detailed table specifying lubrication points and their frequencies based on usage and cleaning.
Instructions for checking and tightening nuts and bolts, including recommended torque and Loctite use.
Guidelines for regularly checking hydraulic hoses for damage and leaks, and replacement intervals.
Recommendations for emptying, cleaning, and opening bottom flaps before winter break or long parking.
General| Brand | LEMKEN |
|---|---|
| Model | Solitair 8 |
| Category | Farm Equipment |
| Language | English |
