Name: LEMKEN Zirkon 8
Brand: LEMKEN
Rating: 5 (1 reviews)

To Next Page

Operating Instructions

Power Harrow

Zirkon 8

- EN -

Item no. 175_4463

2/04.11

LEMKEN GmbH & Co. KG

Weseler Straße 5, D-46519 Alpen / PO Box 11 60, D-46515 Alpen

Telephone (0 28 02) 81-0, Fax (0 28 02) 81-220

E-mail: lemken@lemken.com, Internet: http://www.lemken.com

Table of Contents5
Contents5
General Information11
- Liability11
- Guarantee11
- Copyright12
- Optional Accessories12
Symbols Used in the Operating Instructions13
- Hazard Classes13
- Information13
- Environmental Protection13
- Indication of Passages14
Safety Measures and Precautions15
- Target Group15
- Intended Use15
- Safety Equipment on the Device16
- Safety and Warning Signs16
- Special Safety Instructions20
- Hazardous Areas21
  - Hazardous Areas During Operation of the Implement22
- Residual Risks22
  - Hazard Caused by Mechanical Systems22
  - Hazard Caused by Hydraulic Systems23
- Applicable Rules and Regulations23
- Operation on Public Highways23
- Obligation of the Operator30
- Operating the Device Safely31
Handing over the Device35
Design and Function36
- Overview36
Gearbox Recess36
Knife Tines36
Side Blade36
Power Takeoff Shaft Drive-Through36
Roller36
- Function37
First Use40
- Upper Link and Lower Links40
- Working Depth40
- Side Blades40
- Rear Levelling Beam41
- Wheel Track Eliminators41
- Scrapers41
Preparation of the Tractor42
- Tyres42
- Lift Rods42
- Check Chains or Sway Blocks of the Three Point Linkage42
- Pendulum Compensation42
- Required Hydraulic Equipment42
- Required Power Sources43
- Three-Point Linkage44
- Hydraulic System46
Coupling and Uncoupling47
- Coupling47
- Uncoupling50
Adjustments51
- Cardan Shaft52
- Manual Gearbox55
- Horizontal Position61
- Working Depth61
- Knife Tines with Quick-Coupling System62
- Change in the Direction of Rotation of the Rotors63
- Side Blade64
  - Retracting the Side Blades65
  - Extending the Side Blades66
- Side Blade Extension67
- Wheel Track Eliminator67
  - Relocation at the Side67
  - Adjusting the Working Depth68
- Feed Discs68
  - Relocation at the Side69
  - Adjusting the Working Depth69
- Protective Equipment69
- Power Take-Off70
- Levelling Beam71
  - Rear-Mounted Levelling Beam71
  - Forward-Mounted Levelling Beam71
- Track Markers72
  - Shear Device74
Rollers75
- General Information75
- Adjusting the Scrapers76
- Clearance between Scraper and Roller Casing77
Mounting a LEMKEN Seed Drill78
- Coupling Partsfor Mounting a Solitair Seed Drill78
- Coupling Parts for Mounting Saphir Seed Drill78
- Coupling A-Frame79
Hydraulic Excavation Linkage80
- Adaptation of Hydraulic Excavation Linkage80
- Mounting an Attachment81
- Lowering the Attachment82
- Hoisting Limiter82
Front Mounting83
- Add-On Parts for Pusher on Heavy-Duty Excavation Linkage83
- Pusher , Heavy Duty Version84
- Tube Bar Roller for Front Mounting84
Switching off the Device85
- Shutting down the Device in an Emergency85
- Disposal85
Maintenance and Repairs86
- Special Safety Instructions86
- Environmental Protection89
- Maintenance Intervals89
- Checking Connections to the Tractor90
- Oil Changing91
- Gearbox Recess (Gear Housing)94
- Lubrication96
- Rotor Bearings96
- Bolts97
  - Tightening Torques97
- Tines98
- Scrapers98
- Cardan Shaft98
- Hydraulic Hoses99
Troubleshooting100
- General Information100
- Electrical Equipment100
Tips for Driving on Public Highways101
Technical Data102
Noise, Airborne Sound103
Notes103
Index104

Brand	LEMKEN
Model	Zirkon 8
Category	Farm Equipment
Language	English

LEMKEN Zirkon 8 User Manual

Table of Contents

Questions and Answers:

LEMKEN Zirkon 8 Specifications

Related product manuals