Need help?Do you have a question about the LEMKEN Solitair 8+ and is the answer not in the manual?
Introduces the LET-40 terminal, its components, and basic functions like power and screenshots.
Explains hazard symbols indicating risk levels for safety.
Details the safety procedure for switching off the terminal during travel.
Explains softkey bars and quick access displays in the operating menu.
Details specific displays like driving speed, status, and tramline rhythm.
Describes how messages are collected in an error log and their severity indication.
Explains how to view general data and equipment configuration.
Covers checking individual sensor functions and states.
Shows how to view software versions for job computer and operation terminal.
Accesses calibration parameters for the machine.
Details settings for tramline mechanism, including on/off and track switching.
Covers settings for monitoring minimum and maximum fan speeds.
Covers general monitoring and forward speed settings.
Details the safety procedure for shutting down the operation terminal.
Explains how to reset job, daily, annual, and total counters.
Explains how the tramline rhythm is specified and how to call up the menu.
Details configuration for hectare counter and number of shares per track.
Explains how to start the calibration program and required inputs.
Covers selecting distributions and setting grain weight.
Covers setting grain weight and length for individual distribution.
Details how to set the target distribution rate in kg/ha.
Guides on converting distribution rates between units and entering required data.
Explains how to run the test, view current values, and adapt calibration quantity.
Covers determining the correct gearbox setting based on pulses and weight.
Shows how results are retained and displayed, including types of distribution and gearbox settings.
Covers adjusting terminal settings like sound volume and screen brightness.
Explains how to check current messages and operating states of the implement.
Details displaying, remedying, and accessing information for messages.
Covers activating/deactivating general alarm functions and specific ones like Fan RPM.
Describes how to switch working lights and hopper lights on or off.
Explains the status indicators for metering units on machines with 2 or 4 units.
Details how to switch metering units on/off individually or for half width.
Explains manual track switching (backwards, forwards, stop, lift).
Covers entering or determining the calibration value for the tail wheel.
Details the procedure for manually entering the tail wheel calibration value.
Explains how messages are displayed, colored, and categorized.
Lists malfunctions, their causes, and recommended measures.
Lists warnings, their causes, and recommended measures.
Lists informational messages, their causes, and recommended measures.
Shows available tramline rhythms based on working width.
General| Brand | LEMKEN |
|---|---|
| Model | Solitair 8+ |
| Category | Farm Equipment |
| Language | English |
To Next Page