7CH Essential Instructions R1.0 2022/11/08
1
Essential Instructions
Lemon Seven-channel Telemetry-enabled Stabilized Receiver (LM0086)
Description 2
Connections 2
Step 1: Powering the Receiver 3
Step 2: Binding the Receiver 3
Binding Using the Bind Button 3
Binding Using a Bind Plug 3
Step 3: Setting Failsafe 3
Step 4: Activating Stabilization – if required. 4
Programming the Receiver 4
LED Identification 4
Activating a Stabilization Option 5
Stabilization ON/OFF Channel 5
Stabilization Direction 6
Stabilization Always-ON (Optional) 6
Step 5: Using Stabilization – if activated. 6
1. Set up the transmitter 6
2. Bind the receiver 7
3. Test the receiver 7
4. Mount the receiver in the plane 7
5. Connect servos and speed control (ESC), set switches and wing type 7
6. Verify control directions, adjust centring and servo throws 8
7. Test stabilization response and directions 8
9. Set dual rates and expo in the transmitter 9
10. Adjust the stabilizer gain pots 10
11. Prepare for flying 10
12. Test fly 10
13. Fine tune stabilizer gain 11
14. Restrict Master Gain (if applicable) 11
Using Telemetry 12
Factory Reset the Receiver 13
Firmware Version 13
To Next Page
Need help?
General