- 12 -
BASIC OPERATION
STOP
In play status, press the
Stop
button, the TV screen will return to the turn-on picture,
press
Play/Enter
button, the player will begin to play at the stopping time, here the TV
screen will display Play Resume. In play status, successively press
Stop
button twice
and
then press
Play/Enter
button, the disc will be played from the start.
PAUSE
In play status, press Pause button, the player will pause, and press it again or press
Play/Enter button once to go on playing.
MENU
Pressing Menu button on the remote controller can open or close PBC status.
Note: 1). It will be no effect when play DVD discs.
2). The discs of 1.1 versi
on or some fake have no this function.
ANGLE SELECTION
In play status, successively press Angle button, you can enjoy the same action shot in
different angles. (The function depends on the discs.)
VOLUME ADJUSTMENT
You can press the VOL
-
/+ button to turn u
p or down the volume of this unit.
DIRECTION BUTTONS
Press the direction buttons
to move the cursor to select pictures or menu.
NUMBER BUTTONS
1). In playing songs, press number buttons to directly select the songs you need.
2). If the songs you want exceed 10 pieces, you may do it by pressing
10+
button once,
and then press the number buttons (1
--
10). For example: If the 16th song is
needed, you can press 10+ button first and then press 6 button.
PROGRESSIVE SCAN / INTERLACE
In the mode of YUV output, pressing INT./P.SCAN button can switch the two output
modes: Progressive Scan
and Interlace. Note: If the TV image is abnormal, please first
confirm the correspondence between DVD setup and TV scanning mode.
To Next Page
Loading...
