0906-E
2
INTRODUCTION
CLIMATIC
TM
50
The new generation of microprocessor based control, CLIMATIC
TM
50 may be fitted to the Lennox chiller
range. It inherits 15 years of technology and field operating experience from its predecessors the
CLIMATIC
TM
1 and CLIMATIC
TM
2.
LENNOX has found the latest hardware technology available on the market place and developed a software
specifically designed for water chiller applications, maximising the LENNOX units efficiency and
performance.
Compatibility
This documentation is compatible with following programs:
• Ecologic ranges, from version 50.10
• Ecomax ranges, from version 50.6
Warning
Any parameter modification should be carried out by trained and licensed competent technician.
Before start-up or restart of a unit controlled by Climatic 50, it is mandatory to check adequacy
between Climatic 50 and the unit with its options.
• 38xx menus for unit and options
• 39xx menux for communication
In case of wrong parameters, I/O links could be incorrect and may create some operation problems
for the units and ultimately breakdowns.
Lennox cannot be held responsible for any claims on the units due to a wrong parameters sequence
or a parameters modification carried out by non competent technicians. In this case, the warranty
will be legally null and void.
To Next Page
Loading...
Need help?
General