0906-E
53
“Scheduling” Menu
The scheduling menu can be accessed from the “time zone” menu by pressing “Prg” again
Alarm screen
Alarm History Menu
You can scroll down this menu using the arrow keys and select one of the alarm messages by pressing the
return key.
NOTE: It’s possible to clear all the faults on the terminal display DC50 or DS50. Once in the “Alarm” Menu,
(1000) you just have to push the “ALARM” button for more or less 15s. Then all faults will be erased (Date
and time). If the fault is still present, it will be show again once the end of the reset.
Change da