13
Performance Report
This will display the total number of hours each
month that the system has been running. Example
would be for mar (March) 23H or 23 hours. To
return to the menu screen, touch the house icon in
the upper left-hand corner of the screen. Red bar
indicates heating and blue indicates cooling hours
ran.
Edit Schedules
Any schedule can be edited by touching the right
arrow next to the desired schedule.
edit schedules
>
schedule 1
schedule 2
schedule 3
>
>
<
Figure 7. Edit Schedules Screen
NOTE: See Selection Mode on page 8 to run a
specific schedule.
From the HOME screen touch the MENU and
touch edit schedules option.
The edit schedules screen will allow section of up
too three separate schedules. On the edit
schedules screen, each schedule can be renamed
and edited. See Figure 8 for editing schedules.
NOTE: The fan mode that is selected under the edit
schedules screen will always override the fan
mode selected under the select mode screen or
user settings > fan screen if different
For example, if the select mode fan setting or user
settings > fan is configured for Auto, and the
schedule fan mode is set to circulate, then the
system will follow the fan mode selected in the
active schedule.
To Next Page
Loading...
Need help?
General
