To Next PageTo Next Page
Need help?Do you have a question about the Lennox ComfortSense 3000 Series and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Wi-Fi Capability | No |
| Programmable | Yes |
| Touchscreen | No |
| Backup Battery | Yes |
| Humidity Control | No |
| Air Filter Monitor | No |
| Temperature Range | 45°F to 99°F |
| Power Source | 24 VAC |
| Programmability | 7-day programmable |
| Fan Control | Auto/On |
| Compatibility | Conventional and Heat Pump Systems |
| System Switch | Heat, Cool, Off, Auto |
General installation instructions and safety guidelines for the thermostat.
Description of the thermostat display when power is initially applied.
Details the location and function of thermostat buttons and the display backlight.
Important information regarding button presses, field flashing, and screen return.
Instructions for setting the current day, hour, and minute on the thermostat.
How to enable or disable heat mode, indicated by system box status.
How to enable or disable cool mode, indicated by system box status.
How to adjust the temperature setpoint while in hold mode using arrow buttons.
How the thermostat detects and responds to cooling demand.
How to set a permanent hold, overriding the program schedule.
How to set a temporary hold for 2 hours, overriding the program schedule.
How to alter the default 5-day consecutive period for programming.
Steps to program events and temperatures for heat or cool cycles.
How to select between continuous fan mode and auto fan mode.
How to set up reminders for filter changes based on fan run time.
How to set up reminders for routine checks based on chronological time.
How to change occupancy status between occupied (OC) and unoccupied (UC).
When the 'SERVICE' indicator flashes, indicating a need for qualified service.
How to perform a reset to restore default settings and clear programming.
Instructions for safely removing the thermostat from its wall bracket.
Instructions for safely installing the thermostat onto its wall bracket.
Table listing the thermostat's default configuration settings.
Specifications for thermostat type, power supply range, and operating conditions.
Details on display scale, range, resolution, and accuracy.
How to select either Fahrenheit or Celsius for temperature display.
How to select between internal and external remote temperature sensors.
Details on measurement scale, range, resolution, accuracy, and sampling.
Specifications for the settable temperature range and resolution.
How the thermostat's response to program events is affected by SSR.
Specifies available fan control modes: AUTO or ON.
Information on the latching type of thermostat relays for power saving.
Table detailing terminal designations and their descriptions.
Details on minimum compressor off and on times.
Details on minimum electric heat on time.
Details on minimum furnace on and off times.
Information on minimum cycle time between furnace activations.
How to override minimum compressor OFF and equipment cycle timers.
Available settings for filter reminders based on fan run time.
Available settings for maintenance reminders based on chronological time.
Conditions under which the SERVICE indicator will be displayed.
How thermostat memory is retained during power loss and recovery.
Details on how the LCD backlight activates and its duration.
Specifications for thermostat operating and storage temperature and humidity.
