19
Table 5. User Settings
Setting Selection Function Description
heat / cool (either heat pump,
gas or electric heating is select
ed)
normal
Heats home to desired tempera
ture setting. Options are on or
off.
comfort
If system is two-stage heating or
cooling, then 2
nd
stage is locked
in until demand is satisfied.
emergency heat
Bypasses the first stage of
heating (any stage[s] of heat
pump heating) and goes directly
to the heat stage used for
maximum heating to more
quickly warm a very cold space.
set point range
Heating limits with a default of
90°F. Range is 45°F to 90°F
Cooling limits with a default of
45°F. Range is 45°F to 99°F
cool only (option only appears if
no heating equipment is avail
able or configured)
set point range
Cooling limits with a default of
45°F. Range is 45°F to 99°F
To Next Page
Loading...
