22
Table 8. User Settings
Setting Selection Function Description
display - Allows
the user to control
some information
that is displayed on
the home screen.
Outdoor temperature display or dis
charged air display (what is displayed
here depends on sensor used and con
figured by installer.
Options are off or sensor.
screen saver
Options are enable and disable. Default
is enabled. When enable only the time,
inside temperature and outside
temperature (if outdoor sensor are
installed and enabled) is displayed on
the screen. Touching the screen will
restore all other details.
The backlight setting is also on the
same screen. Options are continuous
on or energy save. Default is
continuous on.
screen brightness
A horizontal bar is provided to adjust
from minimum to maximum brightness.
temperature scale °F for Fahrenheit or C° for Celsius
clean screen
This will disable the touchscreen for 30
seconds.
To Next Page
Loading...
