Page 25
Advanced Settings (Continued)
4 − Refer to the figure below to see how the thermostat buttons
are used to make selections.
5 − Refer to the table on the following pages to make proper set−
up choices for your application.
6 − When all set−up selections have been made, press the
DONE key to save your settings. The thermostat display will
return to the main screen.
NOTE − Thermostats manufactured beginning March 2006 in-
clude program selection to accommodate 2007 daylight savings
calendar. Advanced setting number 330 must be changed to op-
tion 2 at the beginning of 2007 in areas which use the revised
DST calendar in the US and Canada.
DONE
USER
SET−UP
NUMBER
CURRENT
SETTING
ADVANCE TO NEXT
USER SET−UP
PRESS TO EXIT
INSTALLER SET−UP
CHANGE THE
CURRENT
SETTING
RETURN TO PREVIOUS
USER SET−UP
To Next Page
Loading...
