7
2. To continue touch on any blank area of the
screen.
3. From the override setting screen, the
options are 1 hour, 2 hour or Permanent.
Make selection and then touch set.
NOTE: When a permanent hold has been
selected, the thermostat will not return to
the schedule program unit the hold is
released. The screen will display schedule
hold permanent.
4. To exit a permanent schedule hold, touch
the Ⓧ icon
NOTE: For the 1 or 2 hour setting the home
screen will indicate schedule hold until
time indicated (i.e., 11:57 pm).
NOTE: When in any hold status, the mode
status area on the screen will go to the
current status mode. For example, from
schedule 1 to heat/cool.
J. System Status Icons - Equipment operation
information appears along the left side of the
home screen to indicate the current system
status: humidification, transitioning operating
mode, waiting (compressor delay), emergency
heat and transitioning next schedule setting.
To Next Page
Loading...
