Need help?Do you have a question about the Lennox Fhm 120 and is the answer not in the manual?
General| Model Number | FHM120 |
|---|---|
| Category | Heat Pump |
| Refrigerant | R-410A |
| Phase | 3 |
| Voltage | 208/230V |
Procedures for safely moving and handling the unit.
Specifications for unit size and mass for installation planning.
Guidelines and safety measures for lifting and installing the unit.
Necessary site conditions, access, and minimum clearances for installation.
Recommendations for connecting ductwork and water systems.
Steps for installing roof mounting frames and various types of roof curbs.
Steps for installing the energy recovery module.
Configuration details for economiser and extraction systems.
Procedures for making electrical connections and verifying power supply.
Essential checks before starting the unit and initial start-up procedures.
Steps for powering the unit and adjusting control settings.
Performing functional tests and safety checks during commissioning.
Procedures for checking and adjusting belt tension and pulleys.
Methods for measuring and adjusting airflow to achieve optimal balance.
Guidelines for filter replacement, cleaning, and fire classification.
Information on air sock control and UV light option operation.
Details on hot water coil hydraulics, installation, and freeze protection.
Information on electric heater capacities, stages, and wiring.
Preliminary checks, start-up, and pressure adjustments for gas burners.
Operation and adjustment procedures for modulating gas burners.
Explains the symbols and references used in wiring diagrams.
Includes main current diagrams, controller schematics, and connection diagrams.
Details on logical and analogue input/output boards and control variables.
Information about R410A refrigerant and its characteristics.
Explanation of the ASTP system and compressor protection.
Schematic diagrams illustrating refrigeration circuit configurations.
Troubleshooting guide for common refrigeration issues and LP/HP problems.
Diagnosing and resolving faults related to fan blowers.
Troubleshooting steps for electric heater faults and water leaks.
Diagnosing and resolving problems with control units like DC50 and DS50.
A detailed schedule of recommended maintenance tasks and their periodicity.
Overview of the standard warranty terms and conditions.
Specific conditions and exclusions for the anti-corrosion warranty.
Collection of certificates including ISO, EC Conformity, and filter insulation.
To Next Page
