Need help?Do you have a question about the Lennox Fhm 170 and is the answer not in the manual?
Procedures for safe delivery and movement of the unit.
Technical specifications for unit size and weight.
Methods and precautions for lifting the equipment.
Essential checks before unit installation.
Required space for service and airflow.
Guidelines for connecting air ducts to the unit.
Instructions for connecting water supply and return lines.
Diagrams and details of water loop setups.
Steps for mounting the unit on a roof frame.
Details on installing roof curbs and flashing.
Installation guide for a specific roof curb type.
Step-by-step instructions for non-adjustable roof curb.
Specifications and diagrams for adjustable roof curbs.
Details for multidirectional roof curb installation.
Installation guide for return roof curbs.
Installation of horizontal return roof curbs.
Information on transition roof curb types.
Details on the energy recovery system.
Operation of economizer and extraction systems.
Preparatory steps before powering the unit.
Procedures related to the CLIMATIC controller.
Steps for safely powering up the unit.
Procedures for performing operational run tests.
Instructions for checking and adjusting belt tension.
Procedures for mounting and adjusting fan pulleys.
Methods for balancing airflow and system performance.
Information on filter replacement and maintenance.
Explanation of the air sock control system.
Details on the UV light option for air purification.
Information on hot water coil installation and operation.
Details regarding electric heater specifications and installation.
Preliminary checks and starting procedures for gas burners.
Information on modulating gas burner operation and adjustment.
Key to symbols and references in wiring diagrams.
Electrical diagram for main power supply.
Diagram for the Climatic 50 control unit.
Input wiring for the Climatic 50 controller.
Output wiring for the Climatic 50 controller.
Wiring diagram for the DAD smoke detector.
Wiring for standard customer connections.
Wiring for ADC customer connections.
Wiring diagram for gas burner and hot water coil.
Wiring diagram for 120kW gas burner.
Wiring diagram for 180/240kW gas burner.
Wiring diagram for the electric heater.
General diagram for customer connections.
List of control variables and their functions.
Information about R410A refrigerant.
Explanation of compressor protection system.
Diagrams illustrating refrigeration circuit principles.
Troubleshooting for refrigeration system faults.
Troubleshooting for low-pressure issues.
Troubleshooting for high-pressure issues.
Troubleshooting for indoor fan blower issues.
Troubleshooting for outdoor fan issues.
Troubleshooting for electric heater issues.
Troubleshooting for water leaks in various sections.
Troubleshooting for control display issues.
To Next Page
General