Need help?Do you have a question about the Lennox Fhm 150 and is the answer not in the manual?
Procedures for safe delivery, storage, and initial handling of the unit.
Essential checks before installing the unit to ensure readiness and safety.
Guidelines for site preparation, including surface, clearances, and connections.
Recommendations for duct connections between ducts and the unit.
Guidelines for connecting water circuits for water source heat pump operation.
Diagrams and explanations of standard and optional water loop configurations.
Steps and considerations for installing the unit on a roof mounting frame.
Instructions for installing roof curbs and flashing for weather sealing.
Details on non-adjustable, adjustable, multidirectional, return, and transition roof curbs.
Ensuring correct electrical connections and a stable three-phase power supply.
Step-by-step guide for powering up the unit, checking rotation, and initial setup.
Procedures for running tests, checking safety features, and verifying operational parameters.
Guidelines for checking belt tension, alignment, and adjusting pulleys for optimal fan operation.
Methods for measuring, estimating, and adjusting fan speed for correct airflow.
Information on filter replacement, monitoring pressure drop, and fault codes.
Operation and startup sequence for the air sock control system.
Details on the UV light option for bacteria control and safety precautions.
Hydraulic connections, freeze protection, and installation of hot water coils.
General information, sizing, and installation of electric heaters.
Preliminary checks, gas supply, burner startup, and pressure adjustments for gas burners.
Step-by-step guide for installing the energy recovery module onto the rooftop unit.
Critical safety warnings and precautions for working on the unit and its systems.
Guidelines for safe delivery, storage, lifting, and handling of the equipment.
Specific warnings regarding UV light emission and exposure risks.
Explanation of symbols and references used in the wiring diagrams.
Electrical schematics showing main power distribution and component connections.
Details on the Climatic 50 controller, its inputs, outputs, and associated wiring.
Diagrams for general customer connections, including TCB and ADC configurations.
Information on R410A refrigerant properties, safety, and chemical characteristics.
Explanation of ASTP operation, compressor protection modes, and service procedures.
Schematic diagrams illustrating refrigeration circuit configurations for different models.
Troubleshooting guide for refrigeration faults, LP/HP issues, and system problems.
Troubleshooting for indoor/outdoor fan issues and electric heater faults.
Identifying and resolving water leaks and problems with DC50/DS50 control systems.
Recommended tasks, frequencies, and estimated times for regular unit maintenance.
Details on the unit's warranty, including terms, conditions, and anti-corrosion coverage.
EC, NF, and PED conformity declarations and relevant certifications.
To Next Page
General