Lennox M0STAT64Q-1 - Schedule Management Functions; Activate and Deactivate Timed Operation; Edit a Scheduled Event

13
set to Auto, Dry or Off.
10. Follow steps 2 through 9 to setup the next
event. Each event ends at the start time of
the next event.
NOTE - Use the Back/Turbo button to return to
the previous step during event setup.
Activate and Deactivate Timed Operation
1. Press the Timer button to activate timed op-
eration.
2. Press the Power button to deactivate timed
operation.
Setup Days Off
Setup a day, or multiple days, within the sched-
uled week for which the indoor unit will not oper-
ate. When the day arrives, the unit will be pow-
ered off and will not operate until the next day’s
rst event. Once the set day has passed, the
Day Off setting is automatically removed.
1. Press the Timer button.
2. Press the Conrm button.
3. Use the + and - buttons to select the day of
the week.
4. Press the Day off/Del button.
5. Press the Back/Turbo button.
6. Follow steps 3 and 4 for every day off required.
Copy a Schedule to a New Day
All events for the scheduled day will be copied.
1. Press the Timer button until Week is high-
lighted.
2. Press the Conrm button.
3. Use the + and - buttons to select the day to
copy from.
4. Press the Copy/Follow Me button. The letters
“CY” will be displayed on the screen.
5. Use the + and - buttons to select the day to
copy to.
6. Press the Copy/Follow Me button to conrm.
7. Press the Back/Turbo button to return to the
weekly timer.
8. Follow steps 3 through 7 to copy a schedule
for additional days.
Edit a Scheduled Event
1. Press the Timer button until Week is high-
lighted.
2. Press the Conrm button.
3. Use the + and - buttons to select the day of
the week.
4. Press the Conrm button.
5. Use the + and - buttons to select the event to
edit. The display will show the event’s start
time, mode, setpoint and fan speed.
6. Use the + and - buttons to change the start
time of the event.
7. Press the Conrm button to conrm the start
time and move to the operation mode selec-
tion.
8. Use the + and - buttons to change the opera-
tion mode for the event.
9. Press the Conrm button to conrm the op-
eration mode and move to the setpoint se-
lection.
10. Use the + and - buttons to change the set-
point for the event.
11. Press the Conrm button to conrm the set-
point and move to the fan speed selection.
Not available when operation mode is set to