To Next PageTo Next Page
Need help?Do you have a question about the Lennox M0STAT120N-1 and is the answer not in the manual?
General| Brand | Lennox |
|---|---|
| Model | M0STAT120N-1 |
| Category | Controller |
| Language | English |
Illustrates how to connect the controller's 4-pin cable to the extension cable and adapter board.
Sets the fan speed, with options for Auto, LOW, MED, HIGH, and stepless speed regulation.
Scrolls through available operation modes: Auto, Cool, Dry, Heat, Fan.
Scrolls through unit operations like Turbo, Sleep, and Follow Me.
Starts or stops the louver auto swing feature.
Adjusts the indoor temperature in 1°F increments, up to 86°F.
Sets the unit for daily or weekly on/off operation.
Copies schedules from one day to another.
Turns the system on and off.
Confirms each step when managing schedules.
Returns to the previous step.
Disables specific days/schedules or deletes a specific event.
Locks the controller, disabling all other buttons.
Displays the current operating mode (Auto, Cool, Dry, Heat, Aux, Fan).
Shows the current or set temperature.
Indicates when the controller is locked.
Shows temperature units in Fahrenheit or Celsius.
Displays the ambient room temperature.
Shows relative humidity level.
Shows when the Follow Me feature is active.
Indicates when the Turbo feature is active.
Alerts when filter cleaning or replacement is due.
Shows when the Sleep mode is active.
Shows when the Active Clean feature is running.
Indicates when the Intelligent Eye feature is active.
Shows timer settings and status.
Displays the current time.
Indicates horizontal louver swing status.
Indicates vertical louver swing status.
Activates or deactivates the controller's lock function to prevent tampering.
Controls both up/down and left/right louver swing functions.
Controls up/down louver swing and auto swing features.
Allows independent adjustment of each of the four louvers.
Guides on setting the timer for starting or stopping air conditioner operation.
Details on setting weekly timers, including day and time for ON/OFF operations.
Instructions to turn the weekly timer function on or off.
Temporarily turns off heating or cooling until the next scheduled timer event.
Allows setting specific days as 'Day Off' for holiday scheduling.
Applies a delay to the timer function within the weekly timer setting.
