Lennox M0STAT64Q-2 User Manual

15
11. Press the Conrm button to conrm the set-
point and move to the fan speed selection.
Not available when operation mode is set to
Fan or Off.
12. Use the + and - buttons to change the fan
speed for the event.
13. Press the Conrm button to conrm the fan
speed and complete the changes for this
event. Not available when operation mode is
set to Auto, Dry or Off.
NOTE - Use the Back/Turbo button to return to
the previous step.
Delete an Event from a Scheduled Day
This action cannot be undone.
1. Press the Timer button until Week is high-
lighted.
2. Press the Conrm button.
3. Use the + and - buttons to select the day of
the week.
4. Press the Conrm button.
5. Use the + and - buttons to select the event to
delete. The display will show the event’s start
time, mode, set point and fan speed.
6. Press the Day off/Del button.

Lennox M0STAT64Q-2 Specifications

General

Brand	Lennox
Model	M0STAT64Q-2
Category	Controller
Language	English