Do you have a question about the Lennox MLB036S4M and is the answer not in the manual?
Provides detailed specifications for the M22A indoor unit.
Provides detailed specifications for the M33C indoor unit.
Provides detailed specifications for MMDB indoor units.
Provides specifications for MWMC units in the 009-012 ton range.
Provides specifications for MWMC units in the 018-030 ton range.
Provides detailed specifications for MCFA/MCFB units in the 018-048 ton range.
Provides detailed specifications for the MFMA012S4 unit.
General guidelines for system wiring, grounding, safety, and compliance with NEC/CEC standards.
Tables detailing wire gauge and requirements for single-zone and multi-zone system wiring.
Detailed specifications for MPC single-zone units from 0.75 to 1.5 tons.
Detailed specifications for MLB single-zone units from 0.75 to 2 tons.
Detailed specifications for MPC multi-zone units from 1.5 to 2.5 tons.
Detailed specifications for MLB multi-zone units from 1.5 to 3 tons.
Tables showing compatible indoor unit combinations for MPC multi-zone outdoor units.
Tables showing compatible indoor unit combinations for MLB multi-zone outdoor units.
Specifies maximum line set lengths and elevation differences for systems.
Specifies torque values for connections and maximum piping lengths/elevation.
Provides cooling charge data (pressure) based on indoor and outdoor temperatures.
Provides heating charge data (pressure) based on indoor and outdoor temperatures.
Details defrost calculation parameters, theory, and termination conditions.
Provides detailed specifications for the M22A indoor unit.
Provides detailed specifications for the M33C indoor unit.
Provides detailed specifications for MMDB indoor units.
Provides specifications for MWMC units in the 009-012 ton range.
Provides specifications for MWMC units in the 018-030 ton range.
Provides detailed specifications for MCFA/MCFB units in the 018-048 ton range.
Provides detailed specifications for the MFMA012S4 unit.
General guidelines for system wiring, grounding, safety, and compliance with NEC/CEC standards.
Tables detailing wire gauge and requirements for single-zone and multi-zone system wiring.
Detailed specifications for MPC single-zone units from 0.75 to 1.5 tons.
Detailed specifications for MLB single-zone units from 0.75 to 2 tons.
Detailed specifications for MPC multi-zone units from 1.5 to 2.5 tons.
Detailed specifications for MLB multi-zone units from 1.5 to 3 tons.
Tables showing compatible indoor unit combinations for MPC multi-zone outdoor units.
Tables showing compatible indoor unit combinations for MLB multi-zone outdoor units.
Specifies maximum line set lengths and elevation differences for systems.
Specifies torque values for connections and maximum piping lengths/elevation.
Provides cooling charge data (pressure) based on indoor and outdoor temperatures.
Provides heating charge data (pressure) based on indoor and outdoor temperatures.
Details defrost calculation parameters, theory, and termination conditions.
| Cooling Capacity (BTU) | 36, 000 |
|---|---|
| SEER Rating | 16 |
| HSPF Rating | 9.5 |
| Sound Level (dB) | 74 |
| Refrigerant | R-410A |
| Stages | Single |
| Voltage | 208/230 |
| Phase | 1 |
| Sound Level (Outdoor Unit) | 76 |












Loading...