Do you have a question about the Lennox MPA009S4S-1P and is the answer not in the manual?
Cooling Capacity | 9, 000 BTU/h |
---|---|
Voltage | 208/230V |
Refrigerant Type | R-410A |
Phase | 1 |
Maximum Overcurrent Protection | 15 A |
Specifies required clearances for MPA outdoor units for proper operation and service.
Provides wiring diagrams for various single-zone outdoor and indoor units.
Provides wiring diagrams for multi-zone outdoor units.
Provides wiring diagrams for various indoor unit types (MWMA, M22A, M33A, MMDA, MCFA).
Describes the features and operation of the M0STAT60Q wireless remote control.
Details the features and operation of the M0STAT61Q-1 wired remote controller.
Provides general information and procedures for starting up the unit.
Explains how to use the outdoor unit's spot check function and digital display.
Provides a quick reference table for fault codes across various units.
Quick reference for fault codes on single zone 009/012 outdoor units.
Quick reference for fault codes on single zone 018/030 outdoor units.
Quick reference for fault codes on multi-zone outdoor units.
Quick reference for fault codes on all indoor units (09/24 and 09/30-48).
Troubleshooting guide for single zone outdoor units, covering fault codes.
Troubleshooting guide for multi-zone outdoor units, including fault codes.
Details fault codes and troubleshooting for all indoor unit types.
Provides a flowchart for troubleshooting the E0 fault code (Outdoor EEPROM malfunction).
Provides a flowchart for troubleshooting the E2 fault code (Communication malfunction).
Provides a flowchart for troubleshooting the E3 fault code (Indoor fan speed error).
Provides a flowchart for troubleshooting the E4 fault code (Indoor return air temp. sensor error).