• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
For access, please remove the side panel. See “Side panel” on page 61.
Removal steps
Screw (quantity)
Color
Torque
M3 x 5 mm, Nl coated (4)
Black 5.0 ± 0.5 lb/in
Vertical M.2 solid-state drive module
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Chapter 7. Hardware removal and installation 69
To Next Page
Loading...
