Note: Do not change the graphics card slot installation location if you replace a GeforceRTX 4080 graphics
card.
Flex module fan
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
1. Remove the side panel. See “Side panel” on page 61.
2. Disconnect the cable from the fan.
Removal steps
Storage box in flex module
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the internal storage drive, observe the following guidelines:
84
ThinkStation P7 Hardware Maintenance Manual
To Next Page
Loading...
