Status
The Status Information section displays changes to or issues with your EZ Media. If an issue requires user
action to resolve, such as a warning or error message, the EZ Media management console displays a link
in the status message.
The following types of messages can display:
INFORMATION Identifies that a change has been made to the state of your EZ Media, usually by a
user, such as attaching a peripheral.
WARNING Identifies that there is a problem with your EZ Media that requires your attention, but
your device will continue to operate normally for now.
ERROR Identifies an urgent problem with your EZ Media that may result in data loss and
requires your immediate attention.
Device Configuration Options
Obtaining System Status for Your EZ Media & Backup Center 21
To Next Page
Loading...
