Setup Overview
It's easy to set up your px12-400r Network Storage:
● Remove it from the box, connect it to your network switch or hub, and then power it up.
● Launch a web browser and either enter the Setup URL, http://setup.lenovoemc.com, or use the
device IP address or model name to access the device directly.
● Device Setup launches automatically the first time you access your device and guides you
through selecting the configuration options that best meet your needs.
Refer to the following sections for information on the device components and connection instructions.
About the px12-400r Components
Connecting the px12-400r to Your Network
Safety Information
Accessing Your Device If It Is Not Discovered
By default, the px12-400r will attempt to acquire an IP address from DHCP, If there is not a
DHCP server available on the network, the px12-400r will use an IP address in the self-assigned
APIPA range (169.254.x.x).
Setting up Your px12-400r Network Storage
2 Setup Overview
To Next Page
Loading...
