Drive Bay Detail
1. Drive Sled Release Latch — Press the release button and pull the latch to release the drive sled.
Refer to the list of qualified hard disks on the LenovoEMC support site at
www.iomega.com/nasdisks before adding new drives.
2. Drive Status Indicator —
● Solid blue — drive is functioning normally; no faults
● Flashing blue — drive is in RAID rebuild mode
● Solid red — drive failure.
3. Drive Activity Indicator —
● Flashing white — activity in process for the drive’s RAID set
● Off — no activity to the drive’s RAID set
Setting up Your px12-400r Network Storage
4 About the px12-400r Device Components
To Next Page
Loading...
