Factory Reset
Factory Reset returns the px12-400r to its original state. This feature is useful if you give your px12-400r to
someone else.
Factory Reset provides two options for returning your px12-400r to its original state:
● Quickly delete all data — permanently deletes all record of existing or deleted data, users, and
passwords.
● Securely delete all data — this option takes significantly longer, but provides an added security
benefit by overwriting all drives with random data in addition to permanently erasing all data on the
drives to prevent recovery of existing or deleted data, users, and passwords. The secure delete
operation renders all data irrecoverable.
You can use the factory reset feature only to erase the drives internal to the px12-400r. You
cannot use this feature to reset any external storage devices that may be connected.
1. Click the Factory Reset icon to open the management interface.
2. Choose one of the following options:
● Quickly delete all data
● Securely delete all data
3. From the After Reset drop-down menu, choose to Restart or Power off the px12-400r after the
factory reset completes.
4. Click Apply.
5. In the pop-up confirmation, click Yes to perform the factory reset. After the factory reset
completes, the px12-400r powers down or restarts depending on your selection.
6. Device Setup will launch automatically when the px12-400r restarts, so you can configure basic
settings.
When you quickly delete or securely delete all data on your px12-400r, any installed applications,
as listed on the Application Manager page, are also deleted. Go to www.lifelineapps.com to
download and reinstall your applications. In addition, you should visit the LenovoEMC support
web site for specific information on reinstalling applications that came preloaded with your px12-
400r.
Hardware Management
Factory Reset 148
To Next Page
Loading...
