Base (E14/R14/S3 Gen 2)
1. Power button/fingerprint
reader
Use as power button
Press to turn on the computer or put the computer to sleep mode.
To turn off the computer, open the Start menu, click
Power, and then select
Shut down.
The indicator shows the status of the system:
• White, blinking for three times: The computer is initially connected to power.
• White, solid on: The computer is on.
• Off: The computer is off or in hibernation mode.
• White, blinking rapidly: The computer is entering sleep or hibernation mode.
• White, blinking slowly: The computer is in sleep mode.
Use as fingerprint reader*
Log in to your computer with enrolled fingerprints if your computer supports
fingerprint reader. See “Use the fingerprint reader (for selected models)” on page
28.
The indicator shows the status of the fingerprint reader:
• Green, blinking for two seconds, then turn solid on: The computer is ready
for fingerprint scan.
• White, solid on: The scan is successful.
2. Speakers
Enable you to experience high-quality sound.
3. Trackpad
Perform finger touch and all the functions of a traditional mouse. See “Use the
trackpad” on page 16.
4. TrackPoint
®
pointing device
Perform all the functions of a traditional mouse. See “Use the TrackPoint pointing
device” on page 15.
* for selected models
2
E14/R14/E15/S3 Gen 2 User Guide
To Next Page
Loading...
Need help?
General
Weight and Dimensions
