Lenovo ThinkPad R50e Series Hardware Maintenance Manual

Error messages
Symptom or error FRU or action, in sequence
Device address conflict. 1. Load “Setup Defaults” in
the BIOS Setup Utility.
2. Backup battery.
3. System board.
Allocation error for device. 1. Load “Setup Defaults” in
the BIOS Setup Utility.
2. Backup battery.
3. System board.
Failing bits: nnnn. 1. DIMM.
2. System board.
Invalid system configuration
data.
1. DIMM.
2. System board.
I/O device IRQ conflict. 1. Load “Setup Defaults” in
the BIOS Setup Utility.
2. Backup battery.
3. System board.
Operating system not found. 1. Check that the operating
system has no failure and is
installed correctly.
2. Enter the BIOS Setup
Utility and see whether
the hard disk drive and
the diskette drive are
properly identified.
3. Reseat the hard disk drive.
4. Reinstall the operating
system.
5. Diskette drive.
6. Hard disk drive.
7. System board.
Hibernation error. 1. Restore the system
configuration to what it
was before the computer
entered hibernation mode.
2. If memory size has been
changed, re-create the
hibernation file.
Fan error. Fan.
Thermal sensing error. System board.
Authentication of system
services failed. Press <Esc> to
resume.
The Predesktop Area in the
HDD is corrupted. Restore it
from a recovery CD.
Symptom-to-FRU index
58 R50/R50p, R51 Series

Lenovo ThinkPad R50e Series Specifications

General

Brand	Lenovo
Model	ThinkPad R50e Series
Category	Laptop
Language	English