When installing: Ensure that the cable is attached to the hard disk drive assembly or solid-state drive
assembly firmly.
1040 M.2 solid-state drive and M.2 solid-state drive bracket
For access, remove the FRU as following:
• “1010 Bottom cover” on page 64
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the computer is operating or is in suspend mode.
Removal steps of the M.2 solid-state drive assembly and the M.2 solid-state drive bracket
Chapter 9. Removing or replacing a FRU 67
To Next Page
Loading...
Need help?
General